OPERATION INSTRUCTIONS

YOUR SAFETY IS OUR BUSINESS

 

To operate our product in the safest and most efficient manner, please read our manual carefully before use. 

MONAIR STEAMER DESCRIPTION
MONAIR STEAMER
OPERATION INSTRUCTION
1. PREPARATION
•  Make sure water tank is filled with tap water more than 01L.
•  Water pipe completely inserted, air pipe out connected.
•  Machine is placed on a levelled surface.
•  Make sure no objects are covering any parts of the machine. 
•  Plug the 3 prong to 220V, 15A receptacle electricity box. 
 
2. TURN ON
 
•  Turn on the red switch button in front of the machine. 
•  Press the spray gun trigger and hold it; do not to release it yet.
•  Keep the trigger pressed and
press the ON button (Water supply button).
Do not release the trigger yet.
•  With the trigger still pressed, wait for the machine to pump in the water
•  With the trigger still pressed, wait until the HEATING LED light is turned on
•  Now, release the trigger and wait for the boiler to heat the water (6-8 minutes)
•  When the HEATING LED light is turned off, the machine is ready to use.
3. USE
•  Point the steam spray gun nozzle towards the ground and press the trigger.
This releases all remaining water inside the hose.
•  Once the water is released, the steam starts spraying -- the machine is fully ready for operation.
•  Start spraying within a small area first and keep moving.
•  Use clean microfiber towel to wipe the steam right after spraying.
4. WATER SHORTAGE
There are two scenarios for this situation:
4.1. The water tank is running out of water (Water Shortage LED blinking with a beeping sound). To fix it, just refill the water tank and then press ON button (Water supply button). Wait for the machine to pump in water; HEATING LED will turn on. When the HEATING LED light is turned off, the machine is ready to use.
4.2. The machine is designed to spray continuously for 18 minutes;
if the trigger is pressed for longer than 18 minutes, the boiler will have been emptied.
The water shortage error will appear with LED blinking and beeping sound.
 
To solve this, just follow below instruction:
•  Release the trigger, press the ON button (Water supply button) on the panel.
The machine will start pumping water in until it's full of water and start heating it.
The HEATING LED will turn on and start boiling.
•  Once the HEATING LED light is turned off, the machine is ready to use.
5. TURN OFF
•  Switch OFF the red button in front of the machine.
•  Keep the trigger pressed to release the remaining steam and water.
•  Unplug the electric wire.
•  Unplug the water in and air out the pipe.
•  Empty the water tank.
•  Wait until the machine is completely cool
and store the machine with the steam hose and spray gun.
VENDING STEAMER
OPERATION INSTRUCTION
1. PREPARATION
•  Make sure water tank is filled with tap water more than 01L.
•  Water pipe completely inserted, air pipe out connected.
•  Machine is placed on a levelled surface.
•  Make sure no objects are covering any parts of the machine. 
•  Plug the 3 prong to 220V, 15A receptacle electricity box. 
 
2. TURN ON
•  Turn on the red switch button in front of the machine. 
•  Press the spray gun trigger and hold it. Remember not to release it yet.
•  Keep the trigger pressed and press the ON button (Water supply button)
•  Keep the trigger pressed and wait for the machine to pump in the water
•  Keep the trigger pressed until the HEATING LED light is turned on.
•  This time, release the trigger and wait for the boiler to heat the water.
Waiting time around 6 to 8 minutes.
•  When the HEATING LED light is turned off, the steam is ready.
•  LED display time use remaining will turn on in red; the machine is ready to use.
 
3. USE
3.1. IF YOU ARE USING RFID PAYMENT SYSTEM
•  Tap RFID card to card receiver box; the time usage will display.
(Currently the machine is set 1 tap for 2 minutes of use)
•  Tap your RFID card repeatedly until it reaches the desired time on LCD screen.
(Tap again at any point for more time credits)
•  Point the steam spray gun nozzle towards the ground and press the trigger.
This action releases all remaining water inside the hose.
•  Once all water is out, steam starts spraying; the machine is ready for use.
•  Start spraying within a small area first and then keep moving.
•  Use clean microfiber towel to wipe the steam right after spray.
 
3.2. IF YOU ARE USING CREDIT CARD PAYMENT SYSTEM
•  Press the button on payment box to choose the desired amount.
Currently the machine is set 1 CAD for 2 minutes of use.
•  Tap your credit card and see your time use appears on LCD.
You can add on time at any time by repeating this process.
•  Point the steam spray gun nozzle to ground and press the trigger.
This action releases all remaining water inside the hose.
•  Once all water is out, steam starts spraying; the machine is ready for use.
•  Start spraying within a small area first and then keep moving.
•  Use clean microfiber towel to wipe the steam right after spray.
 
4. WATER SHORTAGE
There are two scenarios for this situation:
 
4.1. The water tank is running out of water (Water Shortage LED blinking with a beeping sound). To fix it, just refill the water tank and then press ON button (Water supply button). Wait for the machine to pump in water; HEATING LED will turn on. When the HEATING LED light is turned off, the machine is ready to use.
 
4.2.The machine is designed to spray continuously for 18 minutes;
if the trigger is pressed for longer than 18 minutes, the boiler will have been emptied.
The water shortage error will appear with LED blinking and beeping sound.
To solve this, just follow below instruction:
•  Release the trigger, press the ON button (Water supply button) on the panel.
The machine will start pumping water in until it's full of water and start heating it.
The HEATING LED will turn on and start boiling.
•  Once the HEATING LED light is turned off, the machine is ready to use.
5. TURN OFF
5.1.  FOR CUSTOMER
•  For customers who are using this Steam Vending Hygiene Station, 
once the time runs out, just tap the card.
5.2. FOR OWNER
•  Switch OFF by pressing the red button in front of the machine.
•  Keep the trigger pressed to release the remaining steam and water.
•  Unplug the electric wire.
•  Unplug the water in and air out the pipe.
•  Empty the water tank.
•  Wait until the machine is completely cool
and store the machine with the steam hose and spray gun.
 
MONAIR DESCALING PROCESS
Check out descaling process on Monair Manual Book
 
 
 

​DỊCH VỤ DOANH NGHIỆP

Gói dịch vụ dài hạn

Dịch vụ khác

HỖ TRỢ

Hướng dẫn an toàn

Hỏi đáp nhanh

Tuyển dụng

Liên lạc 

  • Facebook - White Circle
  • Instagram - White Circle
  • PowerSteam Inc. Channel

2016-2019 © PowerSteam Vietnam Inc.